HP Customer Care

Fix HP Printer Error Code 0xc0000185?

The device with Windows 10 OS sometimes displays Boot Configuration Data Error or BSOD. The issue is represented on the blue screen with the error code 0xc0000185. It indicates that the boot configuration data is affected by a bug due to which a few of the information on the PC gets corrupted. If the issue persists, the system of the user doesn’t work until and unless the error gets resolved i.e. the damaged data restores. This issue is activated by the entry of Windows Boot Manager. For the proper functioning of the system, it is necessary to Fix Error Code 0xc0000185 on an immediate basis. It is necessary because due to the presence of the error 0xc0000185, the booting process of the user’s PC gets affected to a large extent. In addition, it also prevents the device from accessing the desktop owing to which the personalized data of the user becomes inaccessible.

Here, we are going to discuss the causes and symptoms of the issues and the efficient error-fixation methods as well.


Fix Error Code 0xc0000185

Get To Know About The Symptoms:

It affects the booting procedure of the system
It makes files inaccessible
BSOD or Blue Screen of Death appears
It sometimes corrupts the data, etc.

Cause Of The Error 0xc0000185

The error 0xc0000185 is recognized by a blue screen. There are several reasons behind the occurrence of this error. It might be caused because of:

a loose cable of the hard drive
missing boot files, etc.

Let’s Discuss The Steps To Fix Error Code 0xc0000185

To overcome the 0xc0000185 error, first-of-all try a simple step to power cycle your device and afterward, log into the desktop of your computer. If this happens, it is recommended to install Reimage tool and scan the PC with it. The Reimage tool has a complete list of Windows’ PC file copies owing to which it either replaces the lost boot configuration files or fixes the error.

In case, you still face the same issue again, then the only option is the creation of Windows 10 installation media by means of a DVD or a USB. Once the bootable Windows installation media created follow the below mentioned steps:

Plug-in the “Windows 10 installation media” or insert it.
Now, reboot the user’s device
Afterward, boot the Windows installation media by hitting any key
Choose time, language, currency, and the input method.
Press Next
Click on the option “Repair your computer (NOT Install Windows)”. Here, choose the OS for repairing.
Now, Click on the option Troubleshoot.
Choose the option “Advanced and click Automatic Repair” or “Startup Repair”
Now, wait until the system detects the OS, choose the appropriate one that is running on your device.
Lastly, unplug the cable of USB, remove DVD bootable media and boot your PC.

Method 1:

You can apply this method in case the issue is not fixed by using Windows 10 installation media. It is so because, in that condition, the entire process gets ended with the BSOD same as before. If it happens, go through the following steps:

Click on the Power button. Try to boot your system
Press F8 key continuously while booting the PC
Now, select the option “Repair your computer”.
Press Windows Key+X
Go to the Command Prompt. Type the below-mentioned commands

Bootrec / scanos

For scanning of the Windows installations on the hard drive. You find this command useful in case the available Windows installations are not listed by the boot manager.

Bootrec / RebuildBcd

The command is written for replacement of corrupted boot files. It is a necessary step used to fix errors.

Bootrec / fixboot

On the partition of the system, it writes a new boot sector by replacing the corrupt one which sometimes causes startup problems.

Bootrec / fixmbr

The command is used to write the MBR or Master Boot Record. It writes it on the partition of the system without writing the partition table again.

(Note: Press Enter after entering each one. Don’t forget to add space before “/ “as it is necessary for command execution)

Method 2:

Check the Computer’s Hard Drive Connections

The error with code 0xc0000185 occurs due to a loose connection of a wire to the hard drive. To fix error code 0xc0000185 by accessing the hard drive and tighten the wires of the device manually. To do so, you have to open the casing of your desktop PC. In case, you have a laptop computer, then search for the “service manual” in your device. If you didn’t find it, search online to get the PDF using which you get to know about the way to securely open the laptop. Moreover, you can also check cables others than this using the guidelines provided in the pdf.

You should be able to find the PDF for your laptop if you search online. It will show you how to safely open your specific laptop. You should also check other cables while you’re at it

Method 3:

Execution of ChkDsk Command

Press the tab Windows Key+X on your keyboard.
Click on the Command Prompt (Admin)
The Command Prompt window gets opened where you have to type chkdsk / R. Now, press Enter

Contact Our Tech Support Team: To Get Reliable Solution For Error Code 0xc0000185

Hopefully, these methods have helped you to resolve the error 0xc0000185. But, in case, you still face an issue in resolving it, contact us as we provide the best alternative methods for error-fixation. To contact us, dial our HP Customer Care Number +1-877-917-4965 or directly email us with your concerned query anytime.


Comodo SSL